Fy3200s 6/12/20/24/25MHz Digital Dds Dual-Channel Function Signal Source Generator Arbitrary Waveform/Pulse Frequency Meter

• Customization: Available
• After-sales Service: Wonderwing
• Warranty: 1 Year
• Model NO.: FY3200S 6/12/20/24/25MHz Digital DDS Dual-channel
• Frequency Range: 6/12/20/24/25MHz
• Type: Function Signal Generator
• Channel: 2
• Display: LCD
• Transport Package: Carton
• Specification: 6/12/20/24/25MHz
• Trademark: Original
• Origin: China
• Production Capacity: 50000PCS/Year
• Package Size: 23.00cm * 30.00cm * 25.00cm
• Package Gross Weight: 2.000kg
• Lead Time: 5 days (1 - 10 Pieces) ; To be negotiated ( > 10 Pieces)

Product Description

Introduction of the instrument

This manual applies to each mode of FY3200S series DDS Function Signal Generator. In

the series, the last two digits "xx" represent the upper limit frequency value (MHz) of Sine Wave

for each mode. For example, FY3225S,"25" means the upper limit frequency of Sine Wave is

25MHz.

The instrument adopts large scale CMOS integrated circuit and high speed microprocessor.

The internal circuit adopts active crystal oscillator as benchmark. So the signal stability is

greatly strengthened. Surface mounting technology improves interference immunity and

operational life span. It has Dual-channel DDS signal output, includes Sine wave, Square wave,

Triangle wave, Sawtooth wave and user-defined waveform. The amplitude, offset and phase

can be controlled. Meanwhile, it has TTL electric level output, External frequency measurement,

counter and sweep functions including Linear sweep and Logarithmic sweep. Both the sweep

frequency and time can be set arbitrarily. It's the ideal instrument for electronic engineering,

laboratories, production lines, teaching and scientific research.

Excellent technical indexes and function features:

Sampling rate up to 250 MSa/s.

Built-in arbitrary waveform with 250 MSa/s sampling rate.

4 downloadable 2048 dots arbitrary waveform memories

With 12 bit wide waveform generator, the output waveform can be more delicate with low

  distortion.

Fully numerical control. It can display and numerical control amplitude, offset, frequency,

  duty cycle of current signal output and phase difference of two channels. And dual-channel

  arbitrary integer multiples of the frequency output when no phase error signal phase drift;

Each function can be adjusted by host computer.

Preinstalled 17 common waveforms.

High frequency accuracy: magnitude 10-6

High resolution: Full range frequency resolution can be 10 mHz.

Both main and subsidiary wave duty cycle are adjustable separately (0.1%~99.9%).

All range continuously adjustable, digital directly setting.

High waveform accuracy: The output waveform synthesized by function calculation is of

  high accuracy and low distortion.

Arbitrary waveform: User can load arbitrary waveform according to the need.

Sweep Function:Linear sweep and Logarithmic sweep. Starting and stop points can be

  set optionally.

Save function: 20 sets of parameters defined by the users can be saved and loaded

  anytime.

Operation mode: Button and knob controlled with LCD1602 display, digital set directly or

   knob adjusted continuously.

Highly reliable:Large scale integrated circuit, Surface mounting technology, reliable and

  durable.

Frequency measurement:Frequency of internal / external signal can be measured

  through built-in 100MHz frequency meter.

Follow function: Built-in parameter follow function covering frequency, amplitude, offset,

  duty cycle, waveform etc. for user's convenience.

Trigger output function: User can choose manual trigger, external trigger or CH2 trigger

  to control the main output to output waveforms of specified periodicity. This periodicity can also

  be defined by the user.

FSK frequency shift keying and ASK amplitude shift keying signal output.

Button introduction

1. PARM button can be used to toggle the interfaces among Waveform,

    Amplitude, Offset, Duty cycle and Phase.

2. WAVE button can be used to enter waveform selecting interface and

    toggle the type of current output waveform.

3. COUNTbutton is shortcut key for measurement and can be used to

    switch between frequency measurement interface and counter interface.

4. SWEEPbutton is shortcut key for sweep function and can be used to

    enter sweep and sweep time interfaces.

5. SYSbutton can be used to enter the interfaces of follow setting, save or

    load.

6. CH1Main waveform confirmation, Output/Stop.

7. CH2Subsidiary waveform confirmation, Output/Stop.

8. Cursor move to left.

9. Cursor move to right.

10. OKADJ confirmation(move downward)

Packing & Delivery


Company Profile


With being OEM manufacturer specializing in PCB&PCBA with 19-year, nowadays,we have built up our strong product research and development center and we are devoting ourselves to electronics smart product. 
Our core value: Customers first,fast and efficient,continuous innovation,and grow together. Enterprise tenet: Uphold operation principles of integrity,efficiency,good quality,innovation,service Establilsh a good work atmosphere of unit,confraternity provide the high-quality products and service for customers. Enterprise goals: Attention to customer needs,quickly and efficiently provide the high-quality products and service for customers. We treat our customer as "partner relationship"to grow up together.
 

Delivery Time (Normally)

1. Product in stock: 1-3Days.

2. Large quantity: Around 10-15Days

3.Customized product: Depends on the prograss for the project and neogiate when project confirmed

 

FAQ

1. who are we?
We are based in Guangdong, China, start from 2003,sell to North America(30.00%),Western Europe(30.00%),Eastern Europe(13.00%),Eastern Asia(13.00%),South America(8.00%),Southern Europe(6.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PCB & PCBA

How can I place an order?

A4: (1) Agreement is achieved on the product price and product specifications.

      (2) We make proforma invoice for your confirmation.

      (3) When you agree on the proforma invoice, you make the payment.

      (4) We deliver the goods after we receive your payment.
 

What is your lead time?

A5: Sample: Immediately, normally within 1day after payment received.

      Small order: About 3-5 working days after payment received.

      Bulk order: About 5-7 working days after payment received.
 

Q6. What are your terms of payment?

A6: Wire Transfer(T/T), Western Union,  PayPal, Ali Pay, Transfer in        WeChat, Credit Card, Trade Assurance, etc.

 

Q7. How about the shipping?

A7: Usually, we will deliver the goods via Express like FedEx, DHL, TNT, UPS, China Post and so on. Shipping price will depend on the goods quantity volume and weight.

 

Contact Information: