Fy6900 Series Fully Numerical Controldual Channel Function/Arbitrary Waveform Generator

• Customization: Available
• After-sales Service: Wonderwing
• Warranty: 1year
• Model NO.: FY6900 Series Fully Numerical Control Dual Channel
• Type: Function Signal Generator
• Channel: 2
• Display: LCD
• Transport Package: Carton
• Specification: 20-50MHz
• Trademark: Original
• Origin: China
• Production Capacity: 50000PCS/Year
• Package Size: 33.00cm * 32.00cm * 25.00cm
• Package Gross Weight: 24.000kg
• Lead Time: 5 days (1 - 10 Pieces) ; To be negotiated ( > 10 Pieces)

Product Description

Product Introduction

This  manual  applies  to   each  model  of  FY6900series  Function/Arbitrary Waveform Signal Generator. The last three characters of the model indicate the up limit output of Sine Wave (MHz). For example, the "60M" of the Model Number " FY6900-60M"  indicates  the  Sine  wave  maximum  output  frequency  is  up  to 60MHz.
FY6900series Dual-channel Function / Arbitrary waveform generator is a set of Function Signal Generator, Arbitrary Waveform Generator, Pulse Generator, Analog / Digital modulator, VCO, Sweep, Counters and Frequency Meter and other  functions  in  a  high  Performance,  cost-effective,  multi-function  signal generator. Abundant shortcut keys and graphical user interface simplifies every operation. Users do not have to spend a lot of time to learn and familiar with the operation of the instrument, you can be skilled use. For education, research and development, production, testing, maintenance and other industries to provide a new choice.
The  instrument adopt the  Direct  Digital  Synthesizer  (DDS) technology and provide stable, precise, pure and low distortion signals. Surface mounting technology improves interference immunity and operational life span. Can output up to 97 groups of functions / arbitrary waveform, contains 33 groups of preset waveforms and 64 groups of user-defined waveforms. Preset waveforms: Sine, Square, Rectangle (Duty Cycle adjustable), Pulse (Pulse width and cycle time can  be  set  accurately),  Triangle/Ramp,  CMOS(0~12V),   Four  channels  TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.

Main Features:

u Adopt the Direct Digital Synthesizer (DDS) technology and provide stable, precise, pure and low distortion signals.
u 2.4 inch TFT Color LCD with 320×240 resolution, displaying parameters and graphics of the two channels at the same time.
u The  instrument  uses  14-bit  high-speed  D/A  converter  chip  (5Vpp  output quantization error is less than 1mV), 250MSa/s sample rate, 14bits vertical resolution.
u Can output up to 97 groups of functions / arbitrary waveform, contains 33 groups  of  preset  waveforms  and  64  groups  of  user-defined  waveforms. Preset waveforms: Sine, Square (Duty Cycle adjustable), Pulse (Pulse width and cycle time can be set accurately), Triangle/Ramp, CMOS(0~12V), Four channels TTL, Exponential Rise, Exponential Fall, Noise, ECG, DC etc.
u Enable  to  store  64  arbitrary waveform  data files,  each  one  of waveform storage depth 8192 points * 14bits;
u Various modulation types: AM, FM, PM, ASK, FSK and PSK modulations.
u Sweep Function: It can sweep 4 properties of signals including frequency,  amplitude, offset and duty cycle; It has Linear and Logarithm two sweep types; 0.01S~999.99S sweep time; Up, Down and roundtrip sweep directions.
u VCO Function (Voltage Control Output): Can be achieved by an external input signal: voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage controlling duty cycle and PWM modulations.
u Burst Output Function: There has Manual Trigger, internal CH2 Trigger, and External Trigger for your options. It can output 1~1048575 pulse trains.
u 100M  Frequency  meter function:  It can  measure frequency,  period,  pulse width  and  duty  cycle.  Max.  frequency  workable  is   100MHz  and  Min. frequency workable is 0.01 Hz.
u Counter Function: It has 2 coupling measure modes including DC coupling and AC coupling. This design can solve inaccuracy problem of AC coupling.
u Standard   dual   full   functional   channels   which   are   equivalent   to   two independent generators.
u Channel SYNC Function: Support waveform copy and state copy between channels.
u Support two or more signal generators connected to achieve multi-channel output, the  maximum  support  16-channel  synchronous  output,  the  phase between each channel can be adjusted.



u Precisely adjust the phases of the two channels, Precision can be 0.01 ..
u Minimum  amplitude  resolution  can  be   up  to   1  mV.  Amplitude   range  is 0~20Vpp.
u Duty-cycle of each channel can  be adjusted  independently0.01%-99.99%, the adjusting resolution is 0.01%.
u -12V~+12V DC Offset function. Resolution 0.001V.
u Save function: It can save 20 sets user-set parameters and can be loaded at any time.
u Communicating function: All functions can be controlled by PC program and the communication protocol is open for secondary development.
u Output short-circuit protection: All channels can work more than 60 seconds when the load is short-circuited.
u Provide  powerful  waveform  editing  PC  software.  Users  can  download arbitrary waveform to this instrument after edit through PC program which is included in user CD.
u Adopt ABS  plastic shell with table type design.  Use  100-240V  (AC)  wide range voltage power supply.
u Can  choose  our  FYA2000S  series  or  FPA1000  series  power  amplifier  to output 20W~100W signal in DC-10MHz width without any distortion.

Front Panel Overview
The front panel is divided into several function areas for easy operation.

Item	Function	Description
1	LCD	2.4 inch TFT(320x240)color LCD. Operation instruction please check chapter "User Interface ".
2	Manu Buttons	F1~F5 buttons are matched with Manu displayed on the LCD. Press corresponding button to activate submenu represented
3	Function    Buttons Area		-   Press this buttons to switch waveforms among Sine, Square,Rectangle, Triangle and so on.
		-   Press this button to switch between frequency meter and counter to measure frequency, period, duty cycle and pulse width of external signal output. -   Both DC and AC are workable. -   Gate Time can be 1S, 10S or 100S. -    Dual  channels  output  and  measurement  function can work together at same time.
		-   Can sweep Sine, Square, Arbitrary and so on.

   

		-   Can sweep frequency, amplitude, offset and phase. -   2 sweep types: Linear, Logarithm. -   VCO voltage controls  parameters of signal output available (for example: voltage controlled oscillator).
				-   Auxiliary functions and system configuration setting.  -   Can save 20 sets waveform  parameters  including frequency, amplitude, offset, phase and so on. -    System  Language  has   English  and  Chinese  for user 's option. -   Buzzer can be turned on/off in this manu. -   Set multimachine uplink. -   Switch Master-Slave status -   Set default status of dual channels at start-up.
				-   Trigger and modulation function button -   Set definite amount of pulse string to output. -   Set modulation mode: ASK, FSK, PSK
				-   VCO function can be set -  Frequency, Amplitude, Bias and Duty of VCO Voltage Control Signal Generator -  Output function of various parameters such as VCO.
4	Arrows			Press Arrow buttons to select figure which you want to edit when setting values of each parameter.
5	ADJ Knob	Press the knob as confirmation (OK button). -   Rotate the ADJ Knob to increase or reduce the current value indicated by the cursor. -   Frequency unit can be changed by Press ADJ Knob under Frequency value setting status. -   Press ADJ Knob to Start/Stop sweep under Sweep interface.
6	Power Button	The power indicator keeps illuminating when power on. Press the power button and the indicator change to notifylight status and the signal output terminates.
7	CH1 channel output connector	CH1 connector, output impedance is 50Ω . When  CH1  channel  activates  (indicator  illuminates),  CH1  outputs signal with parameters set.
8	Output   Channels		Control CH1 output. Press it to switch to CH1 parameter setting interface. -      Press   it   to   turn   on   CH1   output   with   current configuration. The indicator will illuminate. -     Press it again to turn off CH1 output and the indicator will extinguish.

			Control CH2 output. Press it to switch to CH2 parameter setting interface. - Press it to turn on CH2 output with current configuration. The indicator will illuminate. - Press it again to turn off CH2 output and the indicator will extinguish.
			-Confirm key -When editing the frequency parameters, the unit of frequency can be changed by pressing the knob down. -When scanning the interface, press down the knob to start/stop the scanning state.
9	CH2 channel output connector	CH2 connector, output impedance is 50Ω . When CH2 channel activates (indicator illuminates), CH2 outputs signal with parameters set.
10	AC coupling measuring terminal	BNC connector, input impedance 100Ω . For inputting signal of meter or counter.

Back Panel Overview
The back panel of FY6900is as picture 1-2 below. 4 BNC terminals on the left are DC coupling measuring terminals Trig/FSK/ASK/PSK IN, external sweep input VCO IN, Synchronization output connector SYNC OUT, and Synchronization
input connector SYNC IN. Then follows TTL output terminal, USB terminal, power switch and power input socket. 
1.  BNC connector
Trig/FSK/ASK/PSK IN: DC coupling measuring terminal and ASK/PSK/FSK modulation trigger input terminal.
VCO IN: External signal sweep input terminal can realize voltage controlling frequency, voltage controlling amplitude, voltage controlling offset, voltage
controlling duty cycle and so on. Frequency of external signal input should be lower than 500 Hz.
SYNC OUT: Synchronization signal output terminal.
SYNC IN: Synchronization signal input terminal.
2.  TTL signal output
Frequency of Port A is same with frequency of CH1 output. Frequency of Port B is same with frequency of Port A but with reverse phase (180.).
Frequency of Port C is same with frequency of CH2. Frequency of Port D is same with Port C but with reverse phase (180.).
3.  USB Device interface
It's for communication with PC (This is a USB-TTL serial port and driver is needed). Can programming by host computer.
4. Power switch and Power input socket(voltage range AC100V-AC240V).

Warning
To avoid instrument damage, voltage of signal input from EXT.IN
CANNOT exceed ±20Vac+dc.Voltage of signal input from Trig/FSK/ASK/PSK IN CANNOT exceed DC5V.

Note
To ensure the normal work, please use  100-240V AC  power  supply.                                                                                           
Packing & Delivery


Company Profile


With being OEM manufacturer specializing in PCB&PCBA with 19-year, nowadays,we have built up our strong product research and development center and we are devoting ourselves to electronics smart product. 
Our core value: Customers first,fast and efficient,continuous innovation,and grow together. Enterprise tenet: Uphold operation principles of integrity,efficiency,good quality,innovation,service Establilsh a good work atmosphere of unit,confraternity provide the high-quality products and service for customers. Enterprise goals: Attention to customer needs,quickly and efficiently provide the high-quality products and service for customers. We treat our customer as "partner relationship"to grow up together.
 

Delivery Time (Normally)

1. Product in stock: 1-3Days.

2. Large quantity: Around 10-15Days

3.Customized product: Depends on the prograss for the project and neogiate when project confirmed

 

FAQ

1. who are we?
We are based in Guangdong, China, start from 2003,sell to North America(30.00%),Western Europe(30.00%),Eastern Europe(13.00%),Eastern Asia(13.00%),South America(8.00%),Southern Europe(6.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PCB & PCBA

How can I place an order?

A4: (1) Agreement is achieved on the product price and product specifications.

      (2) We make proforma invoice for your confirmation.

      (3) When you agree on the proforma invoice, you make the payment.

      (4) We deliver the goods after we receive your payment.
 

What is your lead time?

A5: Sample: Immediately, normally within 1day after payment received.

      Small order: About 3-5 working days after payment received.

      Bulk order: About 5-7 working days after payment received.
 

Q6. What are your terms of payment?

A6: Wire Transfer(T/T), Western Union,  PayPal, Ali Pay, Transfer in        WeChat, Credit Card, Trade Assurance, etc.

 

Q7. How about the shipping?

A7: Usually, we will deliver the goods via Express like FedEx, DHL, TNT, UPS, China Post and so on. Shipping price will depend on the goods quantity volume and weight.