High Voltage Adjustable Step-Down Board Electric Vehicle Power Conversion and Stabilization Module 48V60V100V Voltage Drop 1.25V-48V

• Customization: Available
• Type: Rigid Circuit Board
• Flame Retardant Properties: V2
• Model NO.: High voltage adjustable step-down board electric v
• Dielectric: CEM-2
• Base Material: Aluminum
• Insulation Materials: Organic Resin
• Processing Technology: Electrolytic Foil
• Application: Medical Instruments
• Mechanical Rigid: Rigid
• Material: Paper Phenolic Copper Foil Substrate
• Brand: Wonderwing
• Transport Package: Static Bag
• Specification: 48V60V100V
• Trademark: NO
• Origin: China
• Production Capacity: 50000PCS/Year
• Package Size: 0.33cm * 0.17cm * 0.85cm
• Package Gross Weight: 0.350kg

Product Description

Product Introduction
1: Widely applicable
2: Small volume
3: Stable performance
4: Built in over temperature, over current, and output short circuit protection
5: Built in soft start
Module parameters:
DC-DC non isolated high-voltage step-down power supply module
Wide voltage input: 12V-120V (120V is the limit voltage, leaving room for long-term operation);
It is recommended to connect to a 30V or higher power source for the first use
Source;
Adjustable output voltage: adjustable between 1.25V-48V;
Input output voltage difference: 5V (i.e. output voltage<input voltage)
-5V);
Output current: 1.5A (Max) for each input voltage point and output
The values of the output voltage points are different, as detailed in the parameter table below;
Built in over temperature, over current, and output short circuit protection
Built in soft start
Switching frequency: 110KHZ
Working temperature: Industrial grade (-40 ºC to+85 ºC)
Board size: 4.4 * 2 * 1.4cm
Input method: IN+positive input, IN - negative input
Output method: OUT+positive output, OUT - negative output
Usage:
1. Connect the connection wire between the module and the power supply before powering on. Remember! Remember! If the input terminal is wired with electricity, it is easy to cause ignition, especially when the input power voltage is high, it may even burn the solder pads of the module.
2. The first use requires connecting to a power supply of 30V or above; Use a multimeter or voltmeter to measure whether the output voltage of the module matches the voltage required by the device.
3. The electrical equipment (load) is connected to the output terminal of the module
4. When the difference between input voltage and output voltage is less than 5V, it can cause output instability or no output phenomenon.
inventory
1 * Voltage stabilizing module

input voltage (V)	output voltage (V)	Output current(A)
120	5	1.5
	12	1.2
	24	0.7
	48	0.5
60	5	1.5
	12	1.3
	24	1.1
	48	0.8
48	5	1.5
	12	1.4
	24	1.2

Packing & Delivery


Company Profile


With being OEM manufacturer specializing in PCB&PCBA with 19-year, nowadays,we have built up our strong product research and development center and we are devoting ourselves to electronics smart product. 
Our core value: Customers first,fast and efficient,continuous innovation,and grow together. Enterprise tenet: Uphold operation principles of integrity,efficiency,good quality,innovation,service Establilsh a good work atmosphere of unit,confraternity provide the high-quality products and service for customers. Enterprise goals: Attention to customer needs,quickly and efficiently provide the high-quality products and service for customers. We treat our customer as "partner relationship"to grow up together.
 

Delivery Time (Normally)

1. Product in stock: 1-3Days.

2. Large quantity: Around 10-15Days

3.Customized product: Depends on the prograss for the project and neogiate when project confirmed

 

FAQ

1. who are we?
We are based in Guangdong, China, start from 2003,sell to North America(30.00%),Western Europe(30.00%),Eastern Europe(13.00%),Eastern Asia(13.00%),South America(8.00%),Southern Europe(6.00%). There are total about 11-50 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
PCB & PCBA

How can I place an order?

A4: (1) Agreement is achieved on the product price and product specifications.

      (2) We make proforma invoice for your confirmation.

      (3) When you agree on the proforma invoice, you make the payment.

      (4) We deliver the goods after we receive your payment.
 

What is your lead time?

A5: Sample: Immediately, normally within 1day after payment received.

      Small order: About 3-5 working days after payment received.

      Bulk order: About 5-7 working days after payment received.
 

Q6. What are your terms of payment?

A6: Wire Transfer(T/T), Western Union,  PayPal, Ali Pay, Transfer in        WeChat, Credit Card, Trade Assurance, etc.

 

Q7. How about the shipping?

A7: Usually, we will deliver the goods via Express like FedEx, DHL, TNT, UPS, China Post and so on. Shipping price will depend on the goods quantity volume and weight.

 

Contact Information: